Blockboard construction
Blockboard core options
Compare pine, poplar, paulownia, fir and plywood-strip cores before confirming the face construction, surface and finished panel.
01
Name the core
Solid timber species or plywood-strip construction.
02
Confirm the strips
Width, joints, gaps, moisture and visible edge reference.
03
Confirm the finished panel
Faces, size, thickness, surface, application and packing.
Five available routes
Specify the core by material and construction
The species name alone does not define performance. Weight, stiffness, screw holding, flatness and dimensional behaviour should be tied to the actual panel construction or agreed sample when they matter to the application.
01
Pine Core
Solid pine strips assembled as the central core. Confirm the pine species or approved reference when it affects the order.
Confirm strip dimensions, joints, internal gaps, moisture condition and face build-up.
02
Poplar Core
Solid poplar strips assembled as the central core.
Confirm strip quality, joints, internal gaps, moisture condition and finished density or weight if required.
03
Paulownia Core
Solid paulownia strips assembled as the central core.
Confirm the species, strip construction, joints, gaps and any application-specific requirement.
04
Fir Core
Solid fir strips assembled as the central core. The exact commercial or botanical species should be confirmed for the order.
Confirm species, strip dimensions, knots, joints, gaps and moisture condition.
05
Plywood Strip Core
A core assembled from strips cut from plywood or another confirmed laminated-veneer panel stock.
Confirm the source-panel construction, strip orientation, joints, gaps, glue-line expectation and finished flatness.
Actual references
Compare the edge construction visually
These photographs support initial identification. The approved order specification or physical sample remains the final reference.
International terminology
Use a descriptive trade name
The clearest quotation name for the photographed construction is Blockboard with Plywood Strip Core. It describes the supplied construction without treating it as a separate standardized product class.
| Recommended order name | Blockboard with Plywood Strip Core |
|---|---|
| Alternative trade wording | Plywood Strip Core Blockboard |
| Useful description | A panel with a central core assembled from strips cut from plywood or confirmed laminated-veneer panel stock. |
| Standards note | If a blockboard standard is required, confirm that the actual strip material and panel construction fall within that standard. |
| LVL core | Use only when the strip material is documented laminated veneer lumber with the corresponding veneer orientation. |
| Laminboard | Use only when the core construction matches the applicable veneer-strip definition; it should not be assumed from a layered edge appearance. |
| Quotation record | Add an edge photograph or approved sample to remove ambiguity between suppliers and markets. |
Choose the core first
Send an edge photo or required core type
We can then confirm the face build-up, melamine surface and remaining order details.